All listed lubricants are FDA approved per 21 CFR 1783910 Paragraph (b)

AMCO 4874 is a lubricating oil designed for aluminum blanking. It is specifically formulated for use on the conversion press operating at 200 - 400 strokes per minute.

AMCO 4880 lubricant was formulated for high speed blanking and forming presses operating in excess of 600 strokes per minute. It is an excellent lubricant for tab forming. Additionally, Amco 4880 increases die life and eliminates transfer.

AMCO 4882 is an environmentally designed lubricant ion oil for aluminum and steel blanking without sacrificing the dimensional accuracy of the process. It is specifically formulated to meet the Clean Air Act of 1990 by minimizing VOC's without compromising die life of lubricity. It can be applied by spray or used with mechanical devices is automated processes provided the metering devices can control the film thickness of deposition.

AMCO 4942 lubricant is a high solids, solvent free formulation which is applied as a pre-lube on coils before shipment from aluminum mill to the end user. Amco 4942 id fed directly into the forming presses at speeds in excess of 600 strokes per minutes. Additionally, it boasts minimal volatiles and eliminates lube transfer.